The 250 classic water butt is an award winning tank. 2025 GLEE New Product of the Year.
The Classic Slim 250l Rainwater Tank can be place directly on the floor, raised on a stand/plinth or wall mounted.
The simple unique design makes it visually discreet and easy to install.
Multiple tanks can be joined together to achieve the desired storage capacity.
This tank can form part of an above ground pumped rainwater harvesting system by incorporating a pump to one of the tank outlets.
This tank incorporates two 4" access caps to allow backnuts to be fitted for diverters, overflows etc.
There are a number of draw off points to allow flexibility:
3 high level (approx 300mm from base) 3/4" BSP draw off points for the supplied high quality brass tap which can be used with a watering can.
2 lower level (approx 150mm from base) 3/4" BSP draw off points for a pump drawoff.
1 No. sump draw off at the base of the tank for tank cleaning
If a smaller slim wall mounted tank is required, consider the 100l Prestige wall mounted tank.
The Classic Ultra Slim 250l Rainwater Tank is manufactured in the UK.
Specification:
Prestige Water Colour Specification
Height: 1195mm
Width : 995mm
Depth: 250mm
Capacity: 250 Litres
Weight: 22kg
Weight when full: 272kg
Material: MDPE
Included Accessories:
5 x 3/4” BSP tank outlet fitting.
1 No. 3/4" brass tap
2 No 3/4" plugs
2 No. washers.
Recommended Accessories
Leaf catcher at the water butt inlet to capture leaves.
Water butt sight level to see the water level in your tank at any time.
Float & Dial Level Gauge to measure the capacity of water inside the tank
Offset kit if a bend in the downpipe is required
Overflow Kit if a diverter/filter is not being used
Tank Freshener to keep the tank fresh
250 Classic Water Butt Stand so the bottom outlets can be used to offer the full capacity
Mains Back Up Kit
External Pump System
The 250 classic water butt is an award winning tank. 2025 GLEE New Product of the Year.
The Classic Slim 250l Rainwater Tank can be place directly on the floor, raised on a stand/plinth or wall mounted.
The simple unique design makes it visually discreet and easy to install.
Multiple tanks can be joined together to achieve the desired storage capacity.
This tank can form part of an above ground pumped rainwater harvesting system by incorporating a pump to one of the tank outlets.
This tank incorporates two 4" access caps to allow backnuts to be fitted for diverters, overflows etc.
There are a number of draw off points to allow flexibility:
3 high level (approx 300mm from base) 3/4" BSP draw off points for the supplied high quality brass tap which can be used with a watering can.
2 lower level (approx 150mm from base) 3/4" BSP draw off points for a pump drawoff.
1 No. sump draw off at the base of the tank for tank cleaning
If a smaller slim wall mounted tank is required, consider the 100l Prestige wall mounted tank.
The Classic Ultra Slim 250l Rainwater Tank is manufactured in the UK.
Specification:
Prestige Water Colour Specification
Height: 1195mm
Width : 995mm
Depth: 250mm
Capacity: 250 Litres
Weight: 22kg
Weight when full: 272kg
Material: MDPE
Included Accessories:
5 x 3/4” BSP tank outlet fitting.
1 No. 3/4" brass tap
2 No 3/4" plugs
2 No. washers.
Recommended Accessories
Leaf catcher at the water butt inlet to capture leaves.
Water butt sight level to see the water level in your tank at any time.
Float & Dial Level Gauge to measure the capacity of water inside the tank
Offset kit if a bend in the downpipe is required
Overflow Kit if a diverter/filter is not being used
Tank Freshener to keep the tank fresh
250 Classic Water Butt Stand so the bottom outlets can be used to offer the full capacity
Mains Back Up Kit
External Pump System